Design for High Quality Improved Version E3D All metal Hotend Kit Red Color 0.4mm/1.75mm Single Nozzle for 3D Printerm
This listing is 0.4mm/1.75mm, 12V40W for the heater(24V40W for option), and with PTFE tube inside. Please let us know if you need other sizes, or the one without PTFE tube.
Item specifics: Size:0.4mm
Type:E3D All metal Hotend Kit
Instructions on how to heat the cooling of the double headed and mixed color nozzles:
Head, color mixing nozzle due to the double pipes and the actual temperature measurement is 2 times the single head, so customers must be active to the radiating tube auxiliary heat dissipation, otherwise easily lead to plug, especially in high temperature in summer time.
1, indoor temperature can not be too high;
2, heating temperature PLA recommended temperature: 185-200 degrees in summer, winter 195-215 degrees;
1Pcs * Improved Version E3D All metal Hotend Kit ( Red );
The customized appearance and colors are available.Please Enter the shop to choose if you have such need.
Please Enter the shop to choose if you need the Blue one.
Please Enter the shop to choose if you need the one without Thermistor and Heater.
Please Enter the shop to choose if you need E3D V6 Hotend kit.
Contact us If you have any question about Product choosing and Produce using
- Improved Version E3D All metal Hotend Kit with Thermistor and Heater Red Color 0.4mm/1.75mm Single Nozzle for 3D Printer
- The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product.
- To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement.
- Due to double pipes, the measured temperature is two times than that of single head. Therefore, customer need to take ancillary action for radiating of the heat sink block, or it will probably cause blocking, especially in summer when the temperature is high.
- 1. Please keep the room temperature be not too high, 2. The recommended temperature of PLA: 185-200 degrees in summer, and 195-215 degrees in winter. 3. We recommend to add the high-quality dual ball bearing 11000 rbm fan for assisted cooling (the speed is three times higher than that of similar products in the market.)