Redrex Upgraded Aluminum Bowden Extruder with 40 Teeth MK8 Drive Gear for Creality CR-10 Series and other Reprap Prusa 3D Printers

NOTE:
▲This extruder block fits perfectly on CR-10 series 3d printers and most bowden extrusion 3d printers.
▲If you want to install it on prusa i3 3d printers, such as Anet A8 ,Geeetech prusa ,Anycubic Prusa i3 and other direct extrusion 3d printers.Please cut the L-bracket bar to work as spacer between the extruder frame block and stepper motor.
▲Stepper motor is ONLY for reference ,NOT included in package.

Features:
❤Original Upgrade Replacement for Creality CR10 Series:CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.This durable aluminum extruder frame works more stable than plastic parts.
❤Bowden Extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
❤Direct Extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some screws replacements.
❤Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear moves the 1.75mm filament very smoothy.
❤Quality Warrenty:For 18 months after the date of purchase,we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.

Specifications:
Material:Aluminum Alloy,Stainless steel;
Special bowden tube fitting:PC4-M6;Fits for ID:2mm OD:4mm Tube;
Brass Drive Gear:40 Teeth, inner diameter:5mm ,outer diameter:11mm,height:11mm ;
Groove Bearing:624U ,groove diameter:11mm ,outer diameter:13mm ;

Package List:
1xExtruder frame block
1xMounting screws set
1xStepper motor mounting bracket
1xPC4-M6 Bowden tube fitting

Product Features

  • Original Upgrade Replacement for Creality CR10 Series:CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.This durable aluminum extruder frame works more stable than plastic parts.
  • Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
  • Direct extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some screws replacements.
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
  • Quality Warrenty:For 18 months after the date of purchase,we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.

Click Here For More Information

[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with Bowden hotend+ MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop + Round Aluminum MK3 heatbed + Filament

This kit are included all the electronics parts you need for 3D printer Kossel Mini Rostock Delta (except power supply, which you can use PC ATX power), so after you purchase this kit, then can start your project right away, no need to worry about what might be missing again. The parts we selected are all with very good quality, also we provide support while you are building it, if you have questions, please feel free to send us an email, we will also help you to complete the project !

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it ! (especially the bowden hot-end and extruder cold-end)

RAMPS 1.4- http://www.amazon.co.uk/gp/product/B00JU41GQ4

Mega 2560- http://www.amazon.co.uk/gp/product/B00GRJ2A6A

LCD 2004- http://www.amazon.co.uk/gp/product/B00K6KCYEE

A4988- http://www.amazon.co.uk/gp/product/B00JXGT1G6

Kossel Extruder- http://www.amazon.co.uk/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.co.uk/dp/B011MWF3QU

Endstop- http://www.amazon.co.uk/gp/product/B00OCFEZ1O

Package List :

(1) 1x 3D Printer Controller Ramps 1.4 Board

(2) 1x Arduino-Compatible Mega 2560 R3 + USB Cable

(3) 5x A4988 StepStick Stepper Motor Driver Module

(4) 1x LCD 2004 Smart Display Controller + Smart Adapter

(5) 1x All Metal MK8 Extruder & Bowden hotend + 40x40x10mm fan

(6) 3x NEMA 17 Motor

(7) 1x Round MK3 Heatbed + thermistor and wire

(8) 6x Mechanical Endstop + Cable

(9) 2x 30cm Ribbon Cable

(10) 1x 40pin Dupont cable 200mm Male to Female

(11) Filament (few for test)

Product Features

  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don’t have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here For More Information

Afinibot All Metal 1.75mm 0.4mm 12V E3D V5 J-head Hotend For Reprap Makerbot Bowder extruder 3D Printer Prusa i3 Kossel Bowden Extruder Peek MKIV HotEnd


*V5 J-head Hotend for Reprap Makerbot 3D printer
*Better stability and Well heat dissipation for increased the heating tablets

Feature
*Voltage: 12V
*Power£º 40W
*Heater Size£º 6mm*20mm(D*L)
*Nozzle: 0.3mm
*Filament: 1.75mm
*Wire Length: 1m(39.4″£©
*Thermistor:?100K NTC ‘EPOC’

Product Features

  • Material: Metal. Overall length: 3.5 cm 89 mm
  • Extrusion nozzle diameter: about 0.16 inch 0.4 mm.
  • Heating pipe is 12V, 40W and 39.37 cm 1 m long.
  • Hermistor: 100K NTC B value 3950 ¡À 1%, 1 m total length.
  • Melt High-temperature materials – up to 260 ¡ã C with integrated thermistor 100k

Click Here For More Information