This is an amazing repair jig and an exceptionally handy addition to any tool collection,Easy to adjust for materials from 0.4″-1.97″(10mm-50mm) thick
Easy to use and install – First, use the jig to drill steeply pitched counter bores in one joint member; then, drive self-tapping screws (without pilot holes) into the other member
Accurate collection – this jig creates flush, corner and angle pocket hole joints for leg-and-rail connections, building face frame cabinets, sneaking screws into tight spots, and fastening picture frames with unlimited applications
Pocket hole jig system for do-it-yourselfers
Heavy duty – the jig kit has an aluminum extrusion and solid metal drill guide.
1 x Pocket Hole Puncher jig kit
1 x 9.5mm Step Drilling Bit
Package Weight: 2.5kg (5.51lb.)
Package Size: 12cm x 12cm x 12cm (4.72in x 4.72in x 4.72in)
Description: • The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater. • Processing Material: Acrylic, Plastic, PVC, Plexiglass. • Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. • The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. • Portable, small occupation, low consumption and reliable operation; • Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation. • Free plugging and unplugging, easy to storage and assembles to worktable very conveniently; • Straight appearance, the effective heating length is 310mm (12″).
Specification: Model: ABM-BT-300 Maximum Bending Width; 310mm (12″) Power:1500W Power Supply: AC 100V – 240V, 50Hz or 60Hz Heating Slot Width: 8mm (0.31″) Heating Thickness: 1mm – 6mm (0.04″ – 0.24″) Heater Size: 1.8″ x 1.8″ x 20.5″(45 x 45 x 520mm) Heater packing size: 4.9” x 4.9” x 25.8″(125 x 125 x 655mm) Box packing Size: 13.8” x 7.9” x 7.1”(350 x 200 x 180mm) Gross Weight: 5kg
Temperature tips: • The temperature at the central of heating tube is the highest, which can be up to 500°, and greater the distance from the central the lower the temperature. • Actually, the appropriate temperature for bending acrylic is about 240°. • The heater can work 24 hours a day on the circumstance that the water temperature is not high.
Reasonable design, small size, compact structure and beautiful appearance;
Heat even and temperature adjustable;
With circulating cooling water system on both sides of heating pipe;
Power supply joint and waterpipe joint are at the same end;