Pawaca 3D Printer MK8 Remote Extruder Accessories Aluminum Alloy Left Right Hand Arm Bracket Part For 1.75mm Filament Extrusion 3D Printers Parts

Features:

3D Printer MK8 Bowden Extruder kit
Used for 1.75mm/ 3mm filament
Teflon Tube: 2mm * 4mm
Type: Left Hand / Right Hand
Full Metal Aluminum Alloy

Attention: it doesn’t include the motor

Package include:

1x MK8 extruder DIY kits (Left / Right hand version)

Product Features

  • 3D Printer MK8 Extruder kit
  • Compatible with 1.75mm filament, Reprap, Makerbot 3D Printer
  • Equipped with two pneumatic fittings, the feed process more smoothly, reducing brushed remote feeding problems arising from this can to some extent, do not worry about other issues stuck supplies
  • Type: Left Hand / Right Hand
  • Attention: it doesn’t include the motor

Click Here For More Information

Aputure Light Storm COB 120t CRI97+ TLCI97+ 3000K 135W Bowens Mount High Power LED Continuous Video Light – 18dB Low Noise with 2.4G Remote Control and V-Mount Plate – Carrying Case Included

Question: the Ls1s is advertised as nearly 1k equivalent and outputs around 30k lux at a half meter, but the COB120t is advertised as nearly 1.5k equivalent
and outputs only around 11k lux at a half meter according to the spec chart. Is it just because of the light angle or what?

Answer: These measurements are at a single point. The LS1S is a 25 degree beam angle and is being compared to the 120T which is a 120 degree beam angle.
That’s about five times the coverage in terms of angle. When we measure output, it’s about measuring the total output, each and every ray of light that comes out of these units.
Aputure will be releasing a video to show how to measure total light output soon.

Specifications
Operation Current: 9A
Power Consumption: 135w
Power Supply: DC 15V
Cooling Mode: Active Cooling
TLCI: ≥97
CQS: ≥95
CRI: ≥97
Color Temperature: 3000K
Radio Frequency: 2.4GHz
Channels: 2001/2/3
Groups: A/B/C/D
Remote Ability: ≤100m
Size(L*W*H): 336.4*186.3*283.9mm
Controller box (Anton Bauer Mount): 269.0*118.7*48.1mm (Vertical antennas included)
Controller box (V-mount): 269.0*118.7*59.6mm (Vertical antennas included)
Foot candles: 0.5M(1032) 1m(232) 2m(57)
LUX: 0.5M(11100) 1m(2500) 2m(610)

Package Contents
1 X Aputure COB 120t Light
1 X Hanging Column
1 X Button Battery
1 X AC-DC Adapter
1 X Controller
1 X Connecting Cable
1 X Power Cable
1 X Controller Box
1 X Carrying Bag
1 X Warranty Card
1 X User Manual
1 X Pergear Clean Kit

Product Features

  • Aputure COB 120t Features CRI97+ and TLCI97+, excellent color reproduction, display natural, pristine color in both photo and video applications.
  • The LS C120t integrates 324 powerful luminous chips, with Bowens Mount Reflector attached, provides 11100lux in 0.5M(1.64ft), ideal light source for photographers and filmmakers.
  • Ultra Silent Fan, Noise Low to 18dB. COB 120t has a remarkably intelligent temperature control system. The fans rotation will be varied based on the correspondent ambient temperature. Furthermore, the fans will go to the maximum of rotation when you press the Auto/Force model. This complex fan system is convenient for both improving the dissipation efficiency and light lifespan in complex shooting environment.
  • Portable and lightweight, weights 3.5lb similar to A Macbook Pro. Practical Assisted Handgrip is very convenient to adjust the light direction. 2.4G FSK wireless control within 100M, no blind angle.
  • Featuring a Tough Aero-Aluminum body, the LS C120t is remarkably tough and durable. It undertakes more than 100 fabrication procedures such as extrusion, cutting, trim, sandblasting, oxidation, laser engraving, etc. The delicate design and elaborate production makes the LS C120t fashionable and robust.

Click Here For More Information

Makeblock DIY mBot Educational 2-in-one Robot Tank Robot Ca Kit for Kids , STEM Robot Toy for Rrobotics Learning and Designed ,Electronics and Arduino Programming App Remote (Bluetooth Version)

Open source platform, Continuous learning
Arduino is an open-source electronic prototyping platform used by people in the global world to start a project quickly. It has been proved to be very expandable and suitable for beginners.

Graphical Programming
Drag-and-drop graphical programming software mBlock developed based on Scratch 2.0 provides a quick way to learn programming, control the robot, and realize multiple functions from the robot.

Fun, and Fun
mBot is all about fun and creativity. It comes with various basic pre-assembled options, including obstacle-avoidance car, line-following vehicle, remote control car, and can be used in multiple games like balloon bursting game, soccer playing, sumo, and etc.

Kindly note:
Further Exploration,you could visit link: http://learn.makeblock.com/en/starter-robot-kit-bluetooth-version/

Parts List:
1 * Beam 0824-96
1 * 6P6C RJ25 cable-20cm
1 * Bracket 3×3
1 * Plate 3×6 1 * HEX Screwdriver 2.5mm
1 * Beam 0824-128 2 * Threaded Shaft 4x39mm
1 * Bracket P3 1 * Cross Screwdriver 3mm
1 * Me Orion(Base on Arduino UNO)
1 * Me Ultrasonic Sensor 3.0
1 * Caster Wheel 1 * Wrench
1 * Me Bluetooth Module (Dual Mode)
1 * 6P6C RJ25 cable-35cm
1 * Nut M8
1 * Battery Holder for (6)AA
2 * Beam 0824-144
2 * Shaft Collar 4mm
2 * DC Motor-25 Bracket B
2 * HEX Allen Key 1.5mm
2 * Shaft Connector-4mm
3 * Nut M4 1 * USB 2.0 A-Male to Micro B-Male Cable
2 * Tyre 68.5x22mm
2 * Base Bracket B
2 * DC Motor-25 6V/185RPM
4 * Headless Set Screw M3x5
4 * Plastic Rivet R4060
4 * Flange Bearing 4x8x3mm
4 * Plastic Rivet R4120
4 * Plastic Ring 4x7x2mm
4 * Timing Pulley 90T
6 * Nylon Stud M4*30
14 * Socket Cap Screw M4x14
22 * Socket Cap Screw M4x8
38 * Track Axle
38 * Track 4 * Countersunk Screw M3x8

Product Features

  • mBot is an educational kit for beginners(kid) to get hands-on experience graphical programming, electronics and robotics. Easy-to-assemble providing infinite possibilities to learn about STEM (science, technology, engineering, mathematics).
  • Me series electronic modules are easy-to-use, aluminum extrusion structure, easy wiring no soldering required , anodized surface proving your kids a safe toy in hand all fun time,safe to beginner(Kids).
  • Contains motors, Makeblock orion controller, ultrasonic sensor, Bluetooth module (dual mode), support App remote control your robot with smart phone or tablet for exploring the robot world.Device and Bluetooth , for IOS 7 or above Bluetooth V4.0, for Android 2.3 or above Bluetooth V2.0.
  • mBot is all about fun and creativity, one kit 2 robots , robot tank or three-wheeled robot car .Robot tanks, connect 38 tracks together,with ultrasonic sensors on the deeper position to detect obstacles timely ,correspondingly change its direction to avoid collisions.Three-wheeled robot car , two tyres and a caster wheel enable to move smoothly.
  • Makeblock DIY mBot Educational Robot Kit ought to be definitely smart choice of educational gift toys for kids, extremely perfect for beginners learning robotics, electronics and arduino programming, coming with various basic pre-assembled options, including obstacle-avoidance car, line-following vehicle, remote control car, and can be used in multiple games like balloon bursting game, soccer playing, sumo, and etc.

Click Here For More Information

3D Printer Parts Heat Sink Block Remote Extrusion Head Blue Color for Improved Version E3D Chimera E3D Cyclops Hotend Kit

3D Printer Parts Heat Sink Block Remote Extrusion Head Blue Color for Improved Version E3D Chimera E3D Cyclops Hotend Kit

Note:
The default shipping is 0.4mm with PTFE Tube inside version(Specs A2). Please let us know if you need the ones with other spces.
The specs below are for your reference. The price of the listing is for 1pc. Please make the quantity of 2 when place the order if you want use the items in dual heads.

Item specifics: Size:0.4mm
Model Number:E3D
Application:3D Printing
Brand Name:Afinibot
Type:2 in 1 out
Color:Blue

Description:
Instructions on how to heat the cooling of the double headed and mixed color nozzles:
Head, color mixing nozzle due to the double pipes and the actual temperature measurement is 2 times the single head, so customers must be active to the radiating tube auxiliary heat dissipation, otherwise easily lead to plug, especially in high temperature in summer time.
1, indoor temperature can not be too high;
2, heating temperature PLA recommended temperature: 185-200 degrees in summer, winter 195-215 degrees;


Package including:
1Pcs * E3D Cyclops 2 In 1 Out Hotend Kit( Blue );


Contact us:
The customized appearance and colors are available.Please Enter the shop to choose if you have such need.

Please Enter the shop to choose if you need the red one.
Please Enter the shop to choose if you need the one with Thermistor and Heater.
Please Enter the shop to choose if you need 2 in 2 out Hotend kit.
Please Enter the shop to choose if you need 3 in 1 out Hotend kit.

Contact us If you have any question about Product choosing and Produce using

Product Features

  • 3D Printer Parts Heat Sink Block Remote Extrusion Head Blue Color for Improved Version E3D Chimera E3D Cyclops Hotend Kit
  • The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product.
  • To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement.
  • Note: This listing is 0.4mm/1.75mm, and with PTFE tube inside. Please let us know if you need other sizes, or the one with PTFE tube.
  • 2. The default shipping of the heater is 12V 40W. Please leave us message if you need the one of 24V 40W.

Click Here For More Information

3D Printer Parts Heat Sink Block Remote Extrusion Head Red Color for Improved Version E3D Chimera E3D Cyclops Hotend Kit

3D Printer Parts Heat Sink Block Remote Extrusion Head Red Color for Improved Version E3D Chimera E3D Cyclops Hotend Kit

Note:
The default shipping is 0.4mm with PTFE Tube inside version(Specs A2). Please let us know if you need the ones with other spces.
The specs below are for your reference. The price of the listing is for 1pc. Please make the quantity of 2 when place the order if you want use the items in dual heads.

Item specifics: Size:0.4mm
Model Number:E3D
Application:3D Printing
Brand Name:Afinibot
Type:2 in 1 out
Color:Red

Description:
Instructions on how to heat the cooling of the double headed and mixed color nozzles:
Head, color mixing nozzle due to the double pipes and the actual temperature measurement is 2 times the single head, so customers must be active to the radiating tube auxiliary heat dissipation, otherwise easily lead to plug, especially in high temperature in summer time.
1, indoor temperature can not be too high;
2, heating temperature PLA recommended temperature: 185-200 degrees in summer, winter 195-215 degrees;


Package including:
1Pcs * E3D Cyclops 2 In 1 Out Hotend Kit( Red );


Contact us:
The customized appearance and colors are available.Please Enter the shop to choose if you have such need.

Please Enter the shop to choose if you need the Blue one.
Please Enter the shop to choose if you need the one with Thermistor and Heater.
Please Enter the shop to choose if you need 2 in 2 out Hotend kit.
Please Enter the shop to choose if you need 3 in 1 out Hotend kit.

Contact us If you have any question about Product choosing and Produce using

Product Features

  • 3D Printer Parts Heat Sink Block Remote Extrusion Head Red Color for Improved Version E3D Chimera E3D Cyclops Hotend Kit
  • The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product.
  • To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement.
  • Note: This listing is 0.4mm/1.75mm, and with PTFE tube inside. Please let us know if you need other sizes, or the one with PTFE tube.
  • 2. The default shipping of the heater is 12V 40W. Please leave us message if you need the one of 24V 40W.

Click Here For More Information