Gip Surface Extrusion Round Kit Aluminium 1070mm

The Gip Surface Extrusion Kit comes in 1m or 2m lengths and is used to house our TAPE100 or TAPE30, which keeps the tapelight safe and out of the way.

Included with the Gip Surface Extrusion Kit is an aluminium extrusion, diffuser and two end caps.

Can be used in conjuction with the Teknik Extrusion ideal for when recessing into plaster board.

This extrusion has been anodized.

Click Here For More Information

Gip Surface Extrusion Round Kit Aluminium 2070mm

The Gip Surface Extrusion Kit comes in 1m or 2m lengths and is used to house our TAPE100 or TAPE30, which keeps the tapelight safe and out of the way.

Included with the Gip Surface Extrusion Kit is an aluminium extrusion, diffuser and two end caps.

Can be used in conjuction with the Teknik Extrusion ideal for when recessing into plaster board.

This extrusion has been anodized.

Click Here For More Information

sourcingmap® M8 Metal Half Round Roll in T-slot Nut Silver Tone 10pcs

Made of high quality steel material.
It is used for T-slot aluminum extrusions to connect other parts.

Product Features

  • Product Name: T Slot Nut; Thread Diameter: M8/0.31″
  • Material: Metal; Color: Silver Tone
  • Weight: 58g
  • Package Content: 10pcs x T Slot Nut
  • Total Size: 19 x 12 x 5mm/0.75″ x 0.47″ x 0.2″(L*W*T)

Click Here For More Information

BQLZR Silver Carbon Steel Half Round Roll In T Spring Nuts M6 Thread for European Standard 20 Series Aluminum Profile Extrusion Slot Pack of 30

Feature:
1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information;
2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.
3.T Spring Nut with M6 thread.
4.Made of high-quality carbon steel.
5.Suitable for 20 Series European standard aluminum profile extrusion slot.

Specification:
Color:Silver
Material: Carbon Steel
Thread Type: M6
Size:13 x 8 x 5mm/0.51 x 0.31 x 0.19″(L x W x H)
Brand name: BQLZR
Weight:47g
Note:
Since the measurement tools are different, there will be 1-3 mm error, not to be a basis/reason for return.

Package include:
30x M6 Thread T Spring Nut

Product Features

  • T Spring Nut with M6 thread.
  • Made of high-quality carbon steel.
  • Suitable for 20 Series European standard aluminum profile extrusion slot.

Click Here For More Information

BQLZR Silver Carbon Steel Half Round Roll In T Spring Nuts M4 Thread for European Standard 20 Series Aluminum Profile Extrusion Slot Pack of 30

Feature:
1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information;
2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.
3.T Spring Nut with M4 thread.
4.Made of high-quality carbon steel.
5.Suitable for 20 Series European standard aluminum profile extrusion slot.

Specification:
Color:Silver
Material: Carbon Steel
Thread Type: M4
Size:13 x 8.1 x 4.8mm/0.51 x 0.31 x 0.18″(L x W x H)
Brand name: BQLZR
Weight:60g
Note:
Since the measurement tools are different, there will be 1-3 mm error, not to be a basis/reason for return.

Package include:
30x M4 Thread T Spring Nut

Product Features

  • T Spring Nut with M4 thread.
  • Made of high-quality carbon steel.
  • Suitable for 20 Series European standard aluminum profile extrusion slot.

Click Here For More Information

[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with Bowden hotend+ MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop + Round Aluminum MK3 heatbed + Filament

This kit are included all the electronics parts you need for 3D printer Kossel Mini Rostock Delta (except power supply, which you can use PC ATX power), so after you purchase this kit, then can start your project right away, no need to worry about what might be missing again. The parts we selected are all with very good quality, also we provide support while you are building it, if you have questions, please feel free to send us an email, we will also help you to complete the project !

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it ! (especially the bowden hot-end and extruder cold-end)

RAMPS 1.4- http://www.amazon.co.uk/gp/product/B00JU41GQ4

Mega 2560- http://www.amazon.co.uk/gp/product/B00GRJ2A6A

LCD 2004- http://www.amazon.co.uk/gp/product/B00K6KCYEE

A4988- http://www.amazon.co.uk/gp/product/B00JXGT1G6

Kossel Extruder- http://www.amazon.co.uk/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.co.uk/dp/B011MWF3QU

Endstop- http://www.amazon.co.uk/gp/product/B00OCFEZ1O

Package List :

(1) 1x 3D Printer Controller Ramps 1.4 Board

(2) 1x Arduino-Compatible Mega 2560 R3 + USB Cable

(3) 5x A4988 StepStick Stepper Motor Driver Module

(4) 1x LCD 2004 Smart Display Controller + Smart Adapter

(5) 1x All Metal MK8 Extruder & Bowden hotend + 40x40x10mm fan

(6) 3x NEMA 17 Motor

(7) 1x Round MK3 Heatbed + thermistor and wire

(8) 6x Mechanical Endstop + Cable

(9) 2x 30cm Ribbon Cable

(10) 1x 40pin Dupont cable 200mm Male to Female

(11) Filament (few for test)

Product Features

  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don’t have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here For More Information