20pcs 20x20mm/0.79×0.79 Single Hole Extrusion End Caps for 2020 European Standard Aluminum Profile Black Plastic


Note:
Suitable for 2020 European Standard Aluminum Profiles.

Specifications:
Material:Plastic
Color:Black
Size:2x2cm/0.79×0.79″(LxW)
Weight:15g

Package Content:
20 x Extrusion End Cap

Product Features

  • Installed on the aluminum end face.
  • There is a tap pin on the center and make your project look more professional.
  • When you installit,you can gently press or use a small hammer.
  • Installed on the aluminum profile, it not only increases beauty but also safety.

Click Here For More Information

Goliton 1pc MK8 extruder aluminium extrusion block DIY kit Makerbot dedicated single nozzle extrusion head aluminum block right hand


Description:
1.MK8 extruded aluminum block extruder bracket
2.Specification:right hand
3.This product contains a MK8 extruded aluminum block extruder bracket

Goliton is a registered trademark protected by the EU Trademark Law. Goliton products are sold by authorized sellers with Goliton package only.

Product Features

  • 1.MK8 extruded aluminum block extruder bracket
  • 2.Specification:right hand
  • 3.This product contains a MK8 extruded aluminum block extruder bracket

Click Here For More Information

Improved Version E3D All metal Hotend Kit with Thermistor and Heater Red Color 0.4mm/1.75mm Single Nozzle for 3D Printer

Design for High Quality Improved Version E3D All metal Hotend Kit Red Color 0.4mm/1.75mm Single Nozzle for 3D Printerm

Note:
This listing is 0.4mm/1.75mm, 12V40W for the heater(24V40W for option), and with PTFE tube inside. Please let us know if you need other sizes, or the one without PTFE tube.

Item specifics: Size:0.4mm
Model Number:E3D
Application:3D Printing
Brand Name:Afinibot
Type:E3D All metal Hotend Kit
Color:Red

Description:
Instructions on how to heat the cooling of the double headed and mixed color nozzles:
Head, color mixing nozzle due to the double pipes and the actual temperature measurement is 2 times the single head, so customers must be active to the radiating tube auxiliary heat dissipation, otherwise easily lead to plug, especially in high temperature in summer time.
1, indoor temperature can not be too high;
2, heating temperature PLA recommended temperature: 185-200 degrees in summer, winter 195-215 degrees;

Package including:
1Pcs * Improved Version E3D All metal Hotend Kit ( Red );

Contact us:
The customized appearance and colors are available.Please Enter the shop to choose if you have such need.

Please Enter the shop to choose if you need the Blue one.
Please Enter the shop to choose if you need the one without Thermistor and Heater.
Please Enter the shop to choose if you need E3D V6 Hotend kit.

Contact us If you have any question about Product choosing and Produce using

Product Features

  • Improved Version E3D All metal Hotend Kit with Thermistor and Heater Red Color 0.4mm/1.75mm Single Nozzle for 3D Printer
  • The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product.
  • To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement.
  • Due to double pipes, the measured temperature is two times than that of single head. Therefore, customer need to take ancillary action for radiating of the heat sink block, or it will probably cause blocking, especially in summer when the temperature is high.
  • 1. Please keep the room temperature be not too high, 2. The recommended temperature of PLA: 185-200 degrees in summer, and 195-215 degrees in winter. 3. We recommend to add the high-quality dual ball bearing 11000 rbm fan for assisted cooling (the speed is three times higher than that of similar products in the market.)

Click Here For More Information

Funnytoday 3D Printer Mk8 Extruder Aluminum Frame Block Diy Kit Reprapi3 All Metal Diy Single Nozzle Extrusion Head Aluminum


3D printer accessories;
MK8 extruder aluminum block DIY kit;
Makerbot dedicated single nozzle;
extrusion head aluminum block For Reprapi3

3 type for your choice; normal; right hand and left hand;
for your most convenient to used your 3D printer.

Aluminum block built into frame
Aluminum lever/fulcrum
Idler wheel for 1.75mm filament
Extruder drive gear
High tension spring
Assembly screws


Package included:

1X Aluminum block built into frame
1X Aluminum lever/fulcrum
1X Idler wheel for 1.75mm filament
1X Extruder drive gear
1X High tension spring
1X Assembly screws

Product Features

  • 100% New
  • High Quality Frame Cartoon
  • Best Frame Matt By FunnyToday LTD
  • Hotest Frame Stand
  • 3D Printer Parts & Accessories

Click Here For More Information

ARBUYSHOP 1 set MK8 extruder aluminum block DIY kit Makerbot dedicated single nozzle extrusion head aluminum block Free Shipping

Item specifics Name: MK8 extruder aluminum block Type A: right hand short B: C: left Product Description Packaging Details Unit Type: set Package Weight: 0.066kg (0.15lb.) Size: 15cm x 12cm 3cm (5.91in 4.72in 1.18in)

Product Features

  • 1
  • set
  • MK8
  • extruder
  • aluminum

Click Here For More Information

ARBUYSHOP 1 set MK8 extruder aluminum block DIY kit Makerbot dedicated single nozzle extrusion head aluminum block Free Shipping !

Item specifics Name: MK8 extruder aluminum block Type A: right hand short B: C: left Product Description Packaging Details Unit Type: set Package Weight: 0.062kg (0.14lb.) Size: 15cm x 12cm 3cm (5.91in 4.72in 1.18in)

Product Features

  • 1
  • set
  • MK8
  • extruder
  • aluminum

Click Here For More Information

ARBUYSHOP Free Shipping, MK8 extruder aluminum block DIY kit, Makerbot dedicated single nozzle, extrusion head aluminum block For Reprapi3

Item specifics Brand Name: KEE PANG Model Number: B0304 Product Description Packaging Details Unit Type: set Package Weight: 0.060kg (0.13lb.) Size: 15cm x 12cm 3cm (5.91in 4.72in 1.18in)

Product Features

  • Free
  • Shipping,
  • MK8
  • extruder
  • aluminum

Click Here For More Information

3D Printer MK8 Extruder Aluminum Frame Block Filament Feeder Single Nozzle DIY Kit Reprap (Left Hand)

Features:

MK8 extruder aluminum block DIY kit,

Makerbot dedicated single nozzle,

extrusion head aluminum block For Reprap i3

Note : stepper motor is not included

Package:

Aluminum block built into frame

Aluminum lever/fulcrum

Idler wheel for 1.75mm filament

Extruder drive gear

High tension spring

Assembly screws

Product Features

  • MK8 Extruder Aluminum Block 3D Printer Accessories Single Nozzle Extrusion Head Aluminum Block DIY Kit Left Hand /Right Hand Direction
  • Material:aluminium alloy
  • Available in Left /Right /Normal Hand direction
  • Makerbot dedicated single nozzle

Click Here For More Information