This aluminum channel is an Aluminum Extrusion for your LED Strip Lights installation.These aluminum channels are not only a great housing for LED strip lights, but also act as a heat dissipation as well, which can expand your LED lifetime. The PC covers conceal the LED strip and make for a professional looking light fixture. Cut easily, the cover simply snaps in place for ease of installation and disassembling.Easy to install, perfect for under cabinet, under stairs, closets, exhibits, furniture, work stations, etc.
Package Content: 5Pcs x LED Aluminum Channel 5Pcs x Transparent PC Cover 10Pcs x End Caps 10Pcs x Mounting Clips
Note: LED strips not included.
PERFORMANCE: The aluminum channel is made from aluminum for better heat dissipation; PC cover works well to help spread the light more evenly from the LED strip lights.; METAL mounting brackets are heat-resisting,no deformation and hold the led channels firmly, never worry about them falling off.
EASY INSTALLATION: The led aluminum channels with plastic covers, can be cut easily.The cover simply snaps in place for ease of installation and disassembling.
APPLICATION: The aluminum channel is ideal for under-cabinet and back splash lighting, back lighting in kitchen, living room, patio, bedroom, closet, and much more with ease.
PROTECTION FOR LED STRIPS: This aluminum channel systems can dissipate the heat produced by the LED light, and plastic covers can protects the led light from exposure to dust ,hair and so on.
PACKAGE INCLUDE:5pcs x 1m(3.28ft) Led Aluminum Channel, 5pcs x Transparent PC Cover, 10pcs x End Caps, 10Pcs x Mounting Clips.
These end caps is made of plastic,4 cross head screw leg, they will make your project look more professional. Simply press in by hand then tap pin into center bore with small hammer or plastic mallet. Widely used in T-slotted aluminum framing system.
Product Name: Aluminium Profile End Cap; Cross Head Screw Size: 11 x 9mm/0.43″ x 0.35″(L*D)
Each Size: 40 x 40 x 5mm/1.6″ x 1.6″ x 0.2″(L*W*T)
Hammer Head Shape, T-Nut with M5 thread. Drop In T-Nuts are designed to load straight into the opening of the T-Slot, then rotate until engagement. Suitable for 40 Series European standard aluminum profile extrusion slot. The width of a Drop In T-Nut must be less than the T-Slot opening dimension, thus thread sizes are always smaller than this opening dimension.
Thread Size: M5/0.2″; Product Name: Drop in T-Nuts
Material: Metal; Weight: 51g
Package Content: 10 x Drop in T-Nuts; Main Color: Silver Tone
Pitch: 0.8mm; Total Size: 19 x 8 x 7mm/ 0.75″ x 0.3″ x 0.28″ (L*W*H)
1. Heat treated steel, pressing thread forming and durable. 2. Bottom of T-Slot Nut Is staked to prevent the stud from protrusion. 3. It is used for T-slot aluminum extrusions to connect other parts. 4. T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps 5. Undersized to fit machine table slot case hardened.
Specification: Product Name: T-Slot Nut Package Content: 1 x T-Slot Nut Material: 45# Steel Grade: 12.9 Hardness: 40HRC Thread Diameter: M6 Slot Width: 8mm / 5/16-inch Slot Depth: 4mm / 4/25-inch Dimension: 13 x 13 x 10mm/0.5-inch x 0.5-inch x 0.4-inch(L*W*H) Weight: 9g; Main Color: Black
Heat treated steel, pressing thread forming and durable.
Bottom of T-Slot Nut Is staked to prevent the stud from protrusion.
It is used for T-slot aluminum extrusions to connect other parts.
T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps
Undersized to fit machine table slot case hardened.