These end caps is made of plastic,4 cross head screw leg, they will make your project look more professional. Simply press in by hand then tap pin into center bore with small hammer or plastic mallet. Widely used in T-slotted aluminum framing system.
Product Name: Aluminium Profile End Cap; Cross Head Screw Size: 11 x 9mm/0.43″ x 0.35″(L*D)
Each Size: 40 x 40 x 5mm/1.6″ x 1.6″ x 0.2″(L*W*T)
Hammer Head Shape, T-Nut with M5 thread. Drop In T-Nuts are designed to load straight into the opening of the T-Slot, then rotate until engagement. Suitable for 40 Series European standard aluminum profile extrusion slot. The width of a Drop In T-Nut must be less than the T-Slot opening dimension, thus thread sizes are always smaller than this opening dimension.
Thread Size: M5/0.2″; Product Name: Drop in T-Nuts
Material: Metal; Weight: 51g
Package Content: 10 x Drop in T-Nuts; Main Color: Silver Tone
Pitch: 0.8mm; Total Size: 19 x 8 x 7mm/ 0.75″ x 0.3″ x 0.28″ (L*W*H)
1. Heat treated steel, pressing thread forming and durable. 2. Bottom of T-Slot Nut Is staked to prevent the stud from protrusion. 3. It is used for T-slot aluminum extrusions to connect other parts. 4. T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps 5. Undersized to fit machine table slot case hardened.
Specification: Product Name: T-Slot Nut Package Content: 1 x T-Slot Nut Material: 45# Steel Grade: 12.9 Hardness: 40HRC Thread Diameter: M6 Slot Width: 8mm / 5/16-inch Slot Depth: 4mm / 4/25-inch Dimension: 13 x 13 x 10mm/0.5-inch x 0.5-inch x 0.4-inch(L*W*H) Weight: 9g; Main Color: Black
Heat treated steel, pressing thread forming and durable.
Bottom of T-Slot Nut Is staked to prevent the stud from protrusion.
It is used for T-slot aluminum extrusions to connect other parts.
T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps
Undersized to fit machine table slot case hardened.